Every Reality Is a Fiction, the Player Essay

Our world consists of many realties. Two being commercial, and the other, artistic. A commercial reality is one limiting risk, and predictability, always aiming to suit those who yearn for it. Artistic reality however, breaks rules, and has social merit. This means there are many possible outcomes. One could be saddened or depressed by the reality, and others, joyful. It is because of this uncertainty in artistic realities that the film industry, as well as many other industries, have taken it upon themselves to glorify the truth. It is because of their coexistence that causes them to clash. The statement that every reality is fictitious, is rather bold however. Although in numbers, there are a few people who hold very strong moral and have a sense of quality in what they do. The Hollywood film industry is mainly commercial. Offering little or no interest in writers work that consists depth. This reality consumes those considered â€Å"naive† to the industry. Commercial realities are realities that are created by people who want to escape their own and subconsciously create a reality that is deemed impossible to the â€Å"real† world. Commercial realities are attractive to most, because you can experience something otherwise unimaginable. This is known as a reality lacking artistic merit. It is us, the audience of massive Hollywood productions, that show true appreciation of films made by producers who show no other interest than creating fictional nonsense and profiting from it. Hollywood creates commercially successful films without artistic merit, and those that have this merit are difficult to come by. Movies such as Who’s Afraid of Virginia Woolf by Ernest Lehmen, and Boys Don’t Cry by Kimberly Peirce pose a social function, and â€Å"break the rules† of The Film Industry. The film making industry is created by artificial characters living paranormal lives that we aspire to have. However, who can jump from a 4 story building and land on the ground with no injury? Who can be stabbed and instantly heeled by only a bandage and continue battling the world with heroic attributes and a vision to sustain â€Å"humanity as we know it†? Commercial realities are fictitious, stick to a strict formula, and leave us dreaming of a better life. The American Film Industry however, would argue that without these commercially rich movies, there will be no economic growth without the return or investment they provide. A contrasting reality to those of commercial is that of artistic. This reality has deeper meaning to it, and value. Artistic reality may be generally defined as the attempt to represent subject matter truthfully, without artificiality and avoiding artistic challenging elements. Artistic reality is better known as ‘realism. ’ â€Å"Realism revolted against the exotic subject matter and exaggerated emotionalism and drama of the Romantic Movement. Instead it sought to portray real and typical contemporary people and situations with truth and accuracy, and not avoiding unpleasant or sordid aspects of life. † – Sourced from Wikipedia’s â€Å"Realism (art)†. Artistic realities reveal the truth, which means they may emphasize the ugly or despicable. Artists use their work as a form of expressionism, which is open to interpretation. Their oeuvre breaks the rules, as they see the ordinary, and can create new pieces that challenge the mind and provide social merit. Many people attempt to depict things accurately, from either a visual, social or emotional perspective. Theatre Realism shares many stylistic choices with naturalism, including a focus on every day (middle-class) drama, colloquial speech, and mundane settings. Realism rejects imaginative idealization in favour of a close observation of outward appearances. Often artistic realities can be labelled as fictitious. This is due to the majority of society being so involved in consumerism, that they can no longer differentiate from commercial being formulated, and artistic as challenging. Commercial realities enhance the breeding of money. Commercial values manipulate the very anatomy of a natural, mundane reality. â€Å"Commercially precious films of ‘reality’ have become the organ grinder’s monkeys of money. † They are made to increase the generative value and staying in power of money, the power of money to breed money, to fertilize itself. They are not made to empower people and provide certain value. Artistic reality however, leaves no stone unturned. Realism sees little value in money, and it sees no reciprocal material possession that could be exchanged for money. Artistic realities merely capture that which is tangible and accurate. Society may attempt to defend themselves by escaping this as it may be deeply depressing. It is the confusion of distinguishing between commercial and artistic realities that ultimately reduces both to nothing but fictitious mumbo jumbo that controls our lives. The difference between the two is huge, however difficult for ‘commoners’, or those not involved in the film industry, to interpret. Whether an individual comprises their lives of commercial or realistic values, these values can be labelled as fabricated or factual. The film industry’s repackaging and misrepresentation of the truth to suit themselves, is entirely profitable. This profitability is their ultimate ruling guideline. If a film does not provide profits, the film was a total failure, regardless of its social merit. Artistic realities are open to interpretation and provide a bit of freedom for people to choose the outcomes of scenarios. Painters, writers, film makers and news reporters are some of the main people involved in the way reality is interpreted because they are their own masters, and creators. Every one watches them, reads their papers or interperates their work. It is important for people to recognise that regardless of the message that is trying to be brought across, that reality is subjective, and hence, it may appear fictitious to anyone apart from their maker. Commercial or artistic.

Nerwork Security Essay

SCENARIO 1 According to scenario 1, the followings are the threads and security measure to control it. THREADS SECURITY MEASURE 1.Fire outbreaks, begins just outside the data center. The attack is an internal and active attack caused by a disgruntled employee or worker i.e an unhappy or a dissatisfied employee I. Availability of fire department center II. Implementation of well programmed sprinkler system III. Building has been evacuated to prevent loss of lives SUGGESTIONS 1.Figure out the worker by investigating and either dismiss him/her or by compensating him/her by treating him right or well. 2. This can also be controlled by enforcing the physical security of the company i.e by installing cctv camera in every hook and corner of the company this will monitor all the employees activities within the vicinity of the company; of which any employee that engages in such a destructive act can be fished out easily by replaying the record. 3. RFID can also be deployed to monitor the in and out of every employee. 2.Anthrax box was detected by an employee in the lobby I. Evacuation of building has be done again to prevent loss of lives II. Health department is on scene to investigate the issues and treat people III. The sprinkler system has been implemented which caused the email and web server to stop working. SUGGESTIONS 1. Employees and visitors should be properly screened and be checked thoroughly before entering the organization or company so as to avoid them bringing in potentially dangerous object in to the company. 2. Foreign object detector technology should be deployed and implemented in the company to ensure proper screening of the people i.e visitors and employees moving in and out of the company. 3. Call the attention of crime investigators so  as to confirm the doer of the crime ; finger print test will done the box . 3.E-mail server and Web server are down I. The sprinkler system was programmed to turned off the web and email server down in case of any emergency so as to prevent data loss , explosion and destruction of the server SUGGESTION 1.E-mail and web server should always be kept in a safer area where it cannot be easily accessed by an intruders and free from disasters like thunder storm, lightening and flooding i.eit should be kept In a water proof data room around the middle level of a building. 2. There should always be an alternative stand-by server kept In another location to replace in case a server is down so ensure the proper functioning of the company e-commerce websites 3. call the right personnel i.e network security engineer to figure out the proper place servers should be kept against disaster when planning to design a network 4. The e-mail and web server should either switched on be repaired or replaced immediately to ensure the proper functioning of the company e-commerce sites so as to prevent lossof customers 4.Customer cannot place order at the company sites since the servers were down I. The company has provided an alternative call center at another location against emergency for customers who cannot place order at the company’s site. 5.Employees are afraid to resume work I. The police department intervened SCENARIO 2 According to scenario 2, the followings are the threads and control measure was taken. THREADS CONTROL MEASURES 1.Explosion occurs at a chemical plant i. They took a precautionary measures by building the headquarters two (2) miles away from the chemical plant so as to loss of lives and properties. ii. Officials took control measure by trying to confirm amount of  potentially dangerous and deadly toxins that have released to the air so as to alert people to evacuate the area if the rate were high or if the area will not fit for lives to survive 2. people were experiencing Breathing difficulties i. Public health officials took a security measure by encouraging people living in the city to â€Å"shelter in place† i.e the use of a structure and its indoor atmosphere to temporarily separate individuals from a hazardous outdoor atmosphere. 3. Company tells the employee not to leave the building i. Employees took a precautionary measure by leaving the building since they were not sure about what they were hearing and that they needs to get home to take care of their families. ii. The security also took a control measure ,by knowing what tell people so as not to create unnecessary or false alarm to the who want to take shelter in company’s lobby. 4. Authority says the explosion was an occupational hazard i.e an accident. i. Several employees were hospitalized for quality treatment People are upset that cafeteria did not have more supply at hand. i. Due to the explosion, company took a security measure by closing the cafeteria for while pending the time that the immediate danger passes. SCENARIO 3 According to scenario 3, the followings are the threads and security measure to control it. THREADS SECURITY MEASURE 1.Pandemic flu outbreaks starts in Hongkong i. The company took a precautionary measure by telling the employees to have traveled to hongkong not to return to work until they see a doctor so as to prevent the spread of the flu within the organization since it is communicable disease ii. As a precautionary measure, the company decided having security at the front door to interrogate visitors whether they have been to hongkong for the past three weeks so as to prevent the spread of disease SUGGESTTIONS i. A quarantine system should also be implemented i.e the isolation of infected animals and people from the normal people. ii. Dust mask should always be used within the company vicinity till the flu suppresses . 2. Few people were diagnosed with the flue i.e infected i. Students took a security measure by absenting from school so as not to contact the flu. ii. As a precautionary measure, some employees did not do to work because they afraid to go out in public so as not to be infected with the deadly flu . 3.The disease spreads i. Employees are demanding for vaccinations and dust mask so as to cure and minimize the spread of the flu disease. ii. As a precautionary measure, managers consider letting crucial staff volunteer for a lock down i.e restricted to a confined area so as to prevent the spread of the disease. iii. They consider directing work to another location or calling retired workers to help out in order to prevent the spread of the disease within the organization 4.The has peaked. i. As a precautionary measure , employees were not whether to return to work so as not contact the deadly flu disease.

How did race influence the positions of first-wave feminists Essay - 1

How did race influence the positions of first-wave feminists - Essay Example The agenda of feminist activists included such aspirations as equality with men in the fields of â€Å"education, professional careers, and culture; married women’s economic and legal dependence; sexual and moral double standards; women’s lack of control over their bodies; the drudgery of housework; low wages; and not least, women’s exclusion from politics† (LeGates, p.203). It is quite obvious that disparities between racial and ethnic communities do not feature in this list. This suggests that while racial minorities continuously strived for emancipation during this period, their struggles were recorded independent of the women’s movement. This apparent inconsistency is reflected in the fact that the leading activists of the first-wave feminist movement were largely white women of middle-class socio-economic background. A closer scrutiny of the movement betrays a double standard on part of the reformers, who, it seemed, â€Å"were content to accept the restraints of race and class as natural and inevitable†.(LeGates, p.197) The issue of race was more pronounced in North America compared to Europe. At the time of first-wave feminism, North America was largely inhabited by Caucasians who emigrated from Western European nations in the preceding two centuries. The leaders of feminist movement saw new immigrants from diverse ethnic and racial backgrounds as a threat to their own position of relative privilege. They were only too willing to perpetrate the racial prejudices and discriminatory practices of their male compatriots. As LeGates points out, â€Å"They used statistics to prove the numerical superiority of n ative-born Anglo-European women in the population, contending that the enfranchisement of all women would offset the foreign vote†. (LeGates, 257) The epitome of such attitudes is captured in the following sentiment expressed by Canadian feminist Margaret McAlpine, who advised the prime minister in 1911 that â€Å"Canadian

Unit III Essay Example | Topics and Well Written Essays - 750 words

Unit III - Essay Example Aside from the willingness and determination of each group to lead the store, language barriers and racial differences are often considered to be the major causes of internal conflicts between the American and Japanese employees. (Sherman, Fefer, & Ah Pak, 1991) Communication problem that exists between the two parties often creates organizational problems that are difficult to solve. Given that most of the Americans are less eager to learn about the Japanese language and vice versa combined with the lack of cultural knowledge about the other race, the Americans and the Japanese employees has divided themselves into two major groups. Since the end of World War II, Japanese had spent a lot of time and effort learning about the cultural differences, business approaches, and technology that are available in other countries in order to rebuild the economic foundation in Japan. (De Mente, 1993: 1) Aside from being aware of the American’s typical straight-forward approach at work, most Japanese are also aware that the Americans require them to maintain an eye contact when they communicate with one another. (Tominaga, 2008) Even though some of the Japanese employees have tried to use the American-style management, not all American-style management had been successful in Japan due to the â€Å"unwritten business principles that are considered to be an integral part of the Japanese culture†. (De Mente, 1993: 2) Most Americans are aware of the typical business practices in Japan such as the need to bow when greeting a Japanese businessman, the need to establish a good rapport with the Japanese workers, and the ritual of exchanging business cards during the first meeting or prior to a business discussion. (Tominaga, 2008) However, very few of the American employees know very little facts and information about the culture behind a

Glucose Essay Example | Topics and Well Written Essays - 750 words

Glucose - Essay Example The figure on the left shows this structure. Since the structure of glucose is flexible, it can wrap around each other which causes a reaction between two ends to form a ring structure as shown in the diagram on the right. In aqueous form, the structure is usually found in alpha and beta. Thus a solution of glucose is a rapidly changing mixture of rings and chains, continually interchanging between the two forms. (IC, 2008) Glucose is the primary source of energy in the human body. Glucose is essential fro humans to gain energy to do any sort of work. Since it reacts with the digestive and endocrine structure of the body, it is important to keep the glucose at a certain level at all times. The human body stores extra glucose in the liver as glycogen, so that when the glucose levels falls below the right level, it can be reabsorbed to keep the human energy stable. Medical problems can arise if the right amount of glucose does not circulate in the blood. (Mithra, 2003) We would feel weary and tired when the glucose level drops, which generally happens when a person is on diet or is starving or excretes insulin in variable amounts. But when the glucose levels are found in excess in the human body, a medical condition called hyperglycemia applies, which means that there is too much sugar in the system or too little insulin. When the proper management of glucose isn't done, a common disease called diabetes can occur. Resolving diabetes is difficult but it can be controlled by following a strict diet as recommended by the dietitian. (Mithra, 2003) Fischer Projection Emil Fischer developed structures of many monosaccharides on a 2D diagram where the projections of the molecules were written vertically keeping the aldehyde or ketone at the peak (PU, n.d.). The model developed for glucose looks like this: Polarity Glucose is highly polar meaning that it helps in the transportation, has a slightly positive and slightly negatively charged end and is able to dissolve in water. Works Cited 1. Debra Manzella, R. (2008). Glucose. Retrieved from About: http://diabetes.about.com/od/glossaryofterms/g/glossary.htm 2. Farabee, M. (2007). CHEMISTRY II: WATER AND ORGANIC MOLECULES. Retrieved from Maricopa Community College: http://www.emc.maricopa.edu/faculty/farabee/biobk/BioBookCHEM2.html 3. IC. (2008). Glucose. Retrieved from Imperial College of London: http://www.ch.ic.ac.uk/vchemlib/mim/bristol/glucose/glucose_text.htm 4. IPCS. (2001). GLUCOSE . Retrieved from http://www.inchem.org/documents/icsc/icsc/eics0865.htm 5. Mithra, S. (2003). What is Glucose Retrieved March 8, 2008, from Wise Geek: http://www.wisegeek.com/what-is-glucose.htm 6. PU. (n.d.). Carbohydrates: The Monosaccharides. Retrieved from Purdue University: http://chemed.chem.purdue.edu/genchem/topicreview/bp/1biochem/carbo5.html 7. Safety, E. H. (2006).

Graduate Labour Market Essay Example | Topics and Well Written Essays - 1500 words

Graduate Labour Market - Essay Example As the report declares in its effort to improve and modernise public services, UK government has created more job opportunities for graduates. Some of the sectors that depict an increase in the rate of employment include public administration, health and education, construction as well as business and finance. It is important to note that the UK economic and political developments have made the region to be one of the countries that have the lowest rates of unemployment in Europe. According to Association of Graduate Recruiters (AGR), approximately 30% of the UK graduates are highly demanded in foreign countries including European region based on the extensive training undertaken by universities. This paper declares that the manager oversees the implementation of effective use of internet as a way of promoting and advertising of the products. Other vital duties of the manager includes evaluation and tracking of online marketing strategies, identifying new online marketing tactics as well as collaborating with personnel who are responsible for developing websites. Due to the stiff competition in the international market, companies in UK and abroad are emulating e-marketing in order to attain a competitive edge. This means that there exist more job opportunities for students who choose Online Marketing Manager as their future career. Individuals intending to become online marketing managers should posses a degree in marketing and have some experience of internet marketing. In addition, it is essential for one to have a good knowledge of English language and proper communication skills (Laermer, 2007). Communication skills are vital since the marketing managers should have adequ ate knowledge on how to address the needs of their clients. Depending with the size of an organization an Online Marketing Manager should be at least 23 years old and with an experience of 3- 4 years in a marketing department. Even though most of the marketing

Other Assignment Example | Topics and Well Written Essays - 750 words

Other - Assignment Example Macro decisions may be applied to save his or her life as the law allows. The macro decisions also reflect on the government decision on health related measures despite being controversial in majority of the counties. Secondly, law regulates is a regulatory strategy that is used in most instances like in statutory language which is used in authorizing payments for hospitals. In addition, they determine the kind of systems that are incorporated within the health care system, and which are beneficial to consumer health care. An example the system includes the Medicare regulated reimbursement that a health consumer is entitled to receive. Thirdly, the administrative procedure act which acts to clarify and direct different implementations with the health care centers and towards consumer health. The act is responsible for the numerous implementations like the Medicare and Medicaid that adds value to consumer health. In addition, the act ensures that laws for those who implement and those who are governed by the measures are effective and adhered to (Institute of Medicine (U.S.)., 2003). 2. Determine if there have been mergers or closing of hospitals in your area in the last several years (anywhere in the U.S) explain those closing/mergers in the context of the materials. In my area, hospitals are merging with the intent of increasing their productivity towards consumer health. This has caused us heavily because of the increased cost of Medicare services offered by this merged hospitals. However, it is noted that the merged hospitals provide quality care and increased savings as patients are correctly diagnosed and treated before their conditions worsens. Most hospitals in my area that have merged have done due to fear of not surviving independently. They believe that by merging, resources are pooled together thus quality of services offered at the merged center is improved. Thus, merging expands and increases the utilization of hospitals in my area by increasing th e diversity of the services offered. Most hospitals that are merging in my area are taken over by larger hospitals who posses the potential to improve the equipments and services offered by purchasing new products and employing more and qualified staff to serve patients suffering from different ailments (Kaplan, 2000). 3. Select a health care market and describe how it deviates from the perfectly competitive model and recommend policies that could repair the deviation(s) from completion you identified. The free health care market deviates from the perfectly competitive model due to the numerous government interventions. When the government interferes with the free health market then resources are not accurately allocated due to biasness. Some of its rules and regulations are also not conducive for perfectly competitive model because health resources are allocated optimally. The government in most cases deems a free health care market not to be suitable to an ideal health care system as it is not sufficient enough to allocate the health care resources adequately. To stop the government from interfering in the free health care market, I will recommend the free markets to form a law that determines the level to which they can allow the government to interfere in their activities. This is because the government does not create free markets, but they have the

An analysis of google ( or apple , amazone) & cloud computing Research Paper

An analysis of google ( or apple , amazone) & cloud computing technology - Research Paper Example Cloud Computing with the virtual setting of softwares and hardwares, provides a effective IT network or Information system (IS) to the business firms, thereby even making their own network slightly redundant. Because of the growing potential, many more firms including Amazon are jumping into this field by setting up their own Cloud Computing environment and then commercially renting it to other business firms and clients. So, this paper will focus on the IS of Cloud Computing, discussing how it impacts Amazon’s, and how it has various applications, although there are some challenges while implementing and running it. The world of today is being ‘run’ mainly with the aid of technology, as it having applications in various facets of human life, starting from day to day activities to key applications in organizational or business environment. Technologies have evolved in various sectors, particularly Information Technology (IT) or Information Systems (IS) have evolved optimally aiding existing business firms in running, expanding, improving and even transforming their operations. Sizable numbers of business firms in various sectors are integrating IT in every aspect of their operations. From carrying out simple operations like opening a door or even authorized entry door to aiding in the accomplishment of complex processes, IT or IS are becoming an all-pervading entity in many of the business firms. The key fact is that emerging technologies or IS has many capabilities to optimally aid the business firms in improving their data storing, sharing as well as communication, which can aid t hem in carrying out all their organizational processes effective, providing them higher productivity and profits. Among the many emerging ISs, the technological or virtual concept of Cloud Computing can provide optimum benefits to the business firms who are using that concept, or if aptly said, are part of the â€Å"Cloud†. At the same time, this Cloud Computing is also positively

Human Resources Management Essay Example | Topics and Well Written Essays - 750 words

Human Resources Management - Essay Example It offers new â€Å"lenses on the tacit and evolutionary aspects of HRM and the value to create† (Berman et al, p, 59). HR is a huge field that begin, creates a policy, carries out and finishes with a continuing solution. To manage Human Resources appears to be extremely simple, although when it comes to be the player then begins the actual problem in dealing with it. It is always trouble-free to give emphasis to a person â€Å"or to that matter anyone about anything† (Berman et al, p, 192). Nonetheless, the greatest is valued at all times. HR in a corporation is constantly available to every one of them regardless of the levels. To begin or make the initial progress, it is the HR division that everyone must get in contact with. They manage the guiding principles and methods within the business for which â€Å"it would have been a year, to do so; provided the focus is on to Quality processes† (Berman et al, p, 221). HR processes incorporates (1) selecting and hir ing staff; (2) guidance and progress; (3) recompense and remuneration; (4) performance appraisal method; and (5) worker relationships. Thorough HR scheduling connects individuals’ management with the company’s duty, image, objectives and aims, in addition to its strategic arrangement as well as budgetary funds. A main objective of HR scheduling is to acquire the accurate amount of individuals with the correct expertise, understanding as well as competencies within the accurate careers on the correct time and at the accurate expenditure. The stress is on connection to strategic scheduling as well as business scheduling in the initial sentence, and the stress is on the planning as well as arrangement of personnel and workers in the final sentence; the procedures through which administration guarantees the correct human resources that are competent of carrying out those assignments that facilitate the business to achieve its goals. Human resource scheduling is the develop ment of human resource tasks, or â€Å"in other words, planning how human resource management will be executed† (Noe et al, p. 123). Therefore, to all intents and purposes, HR scheduling is the expansion of plans in these regions or within similar regions. One might want to extend his personal list related to the business - a record that reveals the functions that HR does within the business. Several individuals connect human resource scheduling with what big businesses do. That is for the reason that, more or less by obligation, big businesses requires to have a lot more proper as well as broad approach to HR scheduling due to their â€Å"size and the intricacy of their businesses† (Noe et al, p. 153). That said, even a company owner having a small number of workers have to consider different employees and human resources concerns. â€Å"Several small company owners do this without really thinking about it† (Noe et al, p.235). For instance, a small company owne r has to consider as well as plan regarding what benefits to present, how to supervise development of personnel, how to forecast the number of employees that are required, how to assess worker performance, and so on. There are five stages of strategic orientation. All build on the earlier one, offering a road map and an assessment of development towards strategic orientation. The five stages are â€Å"(1) involvement in strategic discussion; (2) strategic development; (3) strategic size; (4) creating a strategic

Three phenomena that changed the modern world in the most significant Essay

Three phenomena that changed the modern world in the most significant ways over the past 500 years - Essay Example In the international market, only companies that have implemented superior strategic operation management emerge above the competition. Capitalism is an aspect, which contributes to the elimination of individualism. This is because capitalism is concerned with industrialization whereby human labor is eliminated in the production of goods and services. The machines, plant and machinery take the place of human beings in the production of goods and services. In this regard, the human aspect is eliminated hence affecting individualism. Capitalism emanates from the innovativeness of personnel and division of labor (Getz, Hoffman & Rodriguez, 2009, p.45). This is manifested in the pin industry illustration featuring the division of labor contributions to the increase in productivity of firms. Division of labor leads to invention of plant and machinery and other equipment, which are essential in a capitalist economy. According to Smith, the welfare of the workforce ought not to be given the first priority. Capitalism also shifts relevance from the welfare of employees to the production units. This is because the move deprives their human dignity. It is true that use of money gives satisfaction to the final consumers of commodities. This owes to the fact that consumers prefer saving as opposed to expenditure. Human labor provides utility to the consumers. The reliance on equilibrium in charging the consumers is controversial. Capitalism does not recognize the plight of the laborers within an industry. Therefore, the labor the workforce provides is not the ultimate satisfaction for the company but a means to an end. Capitalism requires many people to work for a common goal and benefit (Getz, Hoffman & Rodriguez, 2009, p.49). The welfare of human beings in capitalism is valuable so long as it adds value in the progression of an industry’s productivity. This is because material development is usually ensured at the

Satellite. Solar system Essay Example for Free

Satellite. Solar system Essay A satellite is defined as any object that orbits any other object. Satellites can be celestial, such as a moon orbiting a planet in the solar system, or a planet in the solar system orbiting the sun. Satellites can also be man-made. Man-made satellites are typically launched into outer space from earth to collect data, photos and other information about Earth and all the many things that exist around it. An animation depicting the orbits of GPS satellites in medium earth orbit. A full size model of the Earth observation satellite ERS 2  In the context of spaceflight, a satellite is an object which has been placed into orbit by human endeavor. Such objects are sometimes called artificial satellites to distinguish them from natural satellites such as the Moon. The first artificial satellite, Sputnik 1, was launched by the Soviet Union in 1957. Since then, thousands of satellites have been launched into orbit around the Earth. These originate from more than 50 countries and have used the satellite launching capabilities of ten nations. A few space probes have been placed into orbit around other bodies and become artificial satellites to the Moon, Venus, Mars, Jupiter and Saturn. Satellites are used for a large number of purposes. Common types include military and civilian Earth observation satellites, communications satellites, navigation satellites, weather satellites, and research satellites. Space stations and human spacecraft in orbit are also satellites. Satellite orbits vary greatly, depending on the purpose of the satellite, and are classified in a number of ways. Well-known (overlapping) classes include low Earth orbit, polar orbit, and geostationary orbit. Satellites are usually semi-independent computer-controlled systems. Satellite subsystems attend many tasks, such as power generation, thermal control, telemetry, attitude control and orbit control. HISTORY OF ARTIFICIAL SATELLITES Sputnik 1: The first artificial satellite The first artificial satellite was Sputnik 1, launched by the Soviet Union on October 4, 1957, and initiating the Soviet Sputnik program, with Sergei Korolev as chief designer. This in turn triggered the Space Race between the Soviet Union and the United States. Sputnik 1 helped to identify the density of high atmospheric layers through measurement of its orbital change and provided data on radio-signal distribution in the ionosphere. The unanticipated announcement of Sputnik 1s success precipitated the Sputnik crisis in the United States and ignited the so-called Space Race within the Cold War. Sputnik 2 was launched on November 3, 1957 and carried the first living passenger into orbit, a dog named Laika. TYPES OF SATELLITE ïÆ'ËœCommunication satellites †¢Communication satellites provide a worldwide linkup of radio, telephone, and television. †¢The first communication satellite was Echo 1, launched in 1960. †¢Relay 1 and telstar 1 were the first active communications satellites. †¢They were launched in 1962. ïÆ'ËœNavigation satellites †¢Navigation satellites are mainly intended to help aircraft, ships and nuclear submarines. †¢These satellites provide constant signals by which aircraft and ships can determine their positions with great accuracy. ïÆ'ËœWeather satellites †¢Weather satellites carry cameras and other instruments pointed toward Earths atmosphere. †¢They can provide advance warning of severe weather and are a great aid to weather forecasting. ïÆ'ËœMilitary satellites †¢ Many military satellites are similar to commercial ones, but they send encrypted data that only a special receiver can decipher. †¢ Military surveillance satellites take pictures just as other earth-imaging satellites do, but cameras on military satellites usually have a higher resolution. ïÆ'ËœScientific satellites †¢Earth-orbiting satellites can provide data to map Earth, determine the size and shape of Earth, and study the dynamics of the oceans and the atmosphere. †¢ Scientists also use satellites to observe the Sun, the Moon, other planets and their moons, comets, stars, and galaxies. HOW ARE SATELLITES LAUNCHED ïÆ'ËœThe trick when launching a satellite is to get it high enough to do its job without losing the capsule to outer space. ïÆ'Ëœ Its a delicate balance of push and pull, accomplished by the inertia of the moving object and the Earths gravity. GEOSYNCHRONOUS SATELLITE LAUNCH VEHICLE ïÆ'ËœThe Geosynchronous Satellite Launch Vehicle (usually known by its abbreviation, GSLV) is an expendable launch system operated by the Indian Space Research Organization (ISRO). ïÆ'ËœIt was developed to enable India to launch its INSAT-type satellites into geostationary orbit and to make India less dependent on foreign rockets. GSLV Geosynchronous Satellite Launch Vehicle FunctionMedium Lift Launch System ManufacturerISRO Country of origin India Size Height49 metres (161 ft) Diameter2.8 metres (9 ft 2 in) Mass402,000 kilograms (890,000 lb) Stages3 Capacity Payload to LEO 5,100 kilograms (11,000 lb) Payload to GTO 2,000 to 2,500 kilograms (4,400 to 5,500 lb) Launch history StatusActive Launch sitesSatish Dhawan Total launches6 (5 Mk.I, 1 Mk.II) Successes2 (Mk.I) Failures3 (2 Mk.I, 1 Mk.II) Partial failures1 (Mk.I) Maiden flightMk.I: 18 April 2001 Mk.II: 15 April 2010 Boosters (Stage 0) No boostersFour Engines1 L40H Vikas 2 Thrust680 kilonewtons (150,000 lbf) Total thrust2,720 kilonewtons (610,000 lbf) Specific impulse 262 sec Burn time160 seconds FuelN2O4/UDMH First Stage Engines1 S139 Thrust4,700 kilonewtons (1,100,000 lbf) Specific impulse 166 sec Burn time100 seconds FuelHTPB (solid) Second Stage Engines1 GS2 Vikas 4 Thrust720 kilonewtons (160,000 lbf) Specific impulse 295 s (2.89 kN†¢s/kg) Burn time150 seconds FuelN2O4/UDMH Third Stage (GSLV Mk.I) 12KRB Engines1 KVD-1 Thrust69 kilonewtons (16,000 lbf) Specific impulse 460 s (4.5 kN†¢s/kg) Burn time720 seconds FuelLOX/LH2 Third Stage (GSLV Mk.II) CUS12 Engines1 ICE Thrust73.5 kilonewtons (16,500 lbf) Specific impulse 460 s (4.5 kN†¢s/kg) Burn time720 seconds FuelLOX/LH2 LIQUID BOOSTERS One of the strap-ons of GSLV-F04 being brought to the Vehicle Assembly Building The GSLV uses four L40 liquid strap-on boosters derived from the L37.5 second stage, which are loaded with 40 tons of hypergolic propellants (UDMH N2O4). The propellants are stored in tandem in two independent tanks 2.1 m diameter. The engine is pump-fed and generates 680 kN (150,000 lbf) of thrust. First stage S139 stage is 2.8 m in diameter and is made of M250 grade maraging steel and it has a nominal propellant loading of 139 t. Second stage The second stage is powered by the Vikas engine. It has 2.8 m diameter and uses 37.5 metric tons of liquid propellants with UDMH as fuel and nitrogen tetroxide (N2O4) as oxidizer, in two aluminium alloy compartments separated by a common bulk head. It delivers 720 kN (160,000 lbf) of thrust. Third stage GSLV Mk.II D3 The third stage is propelled by a cryogenic rocket engine, 2.8 m in diameter and uses liquid hydrogen (LH2) and liquid oxygen (LOX) in two separate tanks of aluminium alloy interconnected by an inter-stage. Propellant loading is 12.5 t. The indigenous cryogenic engine was built in Tamil Nadu at the Liquid Propulsion Systems Centre. POLAR SATELLITE LAUNCH VEHICLE ïÆ'ËœThe Polar Satellite Launch Vehicle commonly known by its abbreviation PSLV is an expendable launch system developed and operated by the Indian Space Research Organization (ISRO). ïÆ'ËœIt was developed to allow India to launch its Indian Remote Sensing (IRS) satellites into sun synchronous orbits. ïÆ'ËœPSLV can also launch small size satellites into geostationary transfer orbit (GTO). ïÆ'ËœThe PSLV has launched 41 satellites (19 Indian and 22 from other countries) into a variety of orbits till date. Polar Satellite Launch Vehicle PSLV-C8 (CA Variant) carrying the AGILE x-ray and ÃŽ ³-ray astronomical satellite of the ASI lifting off from Sriharikota FunctionMedium Lift Launch System ManufacturerISRO Country of origin India Size Height44 metres (144 ft) Diameter2.8 metres (9 ft 2 in) Mass294,000 kilograms (650,000 lb) Stages4 Capacity Payload to LEO 3,250 kilograms (7,200 lb) Payload to HCO 1,600 kilograms (3,500 lb)[1] Payload to GTO 1,060 kilograms (2,300 lb)[1] Launch history StatusActive Launch sitesSriharikota Total launches17 PSLV: 10 PSLV-CA: 6 PSLV-XL: 1 Successes15 PSLV: 8 PSLV-CA: 6 PSLV-XL: 1 Failures1 (PSLV) Partial failures1 (PSLV) Maiden flightPSLV: 20 September 1993 PSLV-CA: 23 April 2007 PSLV-XL: 22 October 2008 Notable payloadsChandrayaan-1 Boosters (Stage 0) â„â€" boosters6 Engines1 solid Thrust502.600 kN Specific impulse 262 sec Burn time44 seconds FuelHTPB (solid) First stage Engines1 solid Thrust4,860 kN Specific impulse 269 sec Burn time105 seconds FuelHTPB (solid) Second stage Engines1 Vikas Thrust725 kN Specific impulse 293 sec Burn time158 seconds FuelN2O4/UDMH Third stage Engines1 solid Thrust328 kN Specific impulse 294 sec Burn time83 seconds FuelSolid Fourth stage Engines2 liquid Thrust14 kN Specific impulse 308 sec Burn time425 seconds FuelMMH/UDMH PSLV is designed and developed at Vikram Sarabhai Space Centre (VSSC), Thiruvananthapuram and Kerala. The inertial systems are developed by ISRO Inertial Systems Unit (IISU) at Thiruvananthapuram. The liquid propulsion stages for the second and fourth stages of PSLV as well as the reaction control systems are developed by the Liquid Propulsion Systems Centre (LPSC), also at Thiruvananthapuram. The solid propellant motors are processed by Satish Dhawan Space Centre SHAR, which also carries out launch operations. After some delays, the PSLV had its first launch on 20 September 1993. Although all main engines performed as expected, an altitude control problem was reported in the second and third stages. After this initial setback, ISRO met complete success with the third developmental launch in 1996. Further successful launches followed in 1997, 1999, and 2001. PSLV continues to be the work horse of Indian satellite launches, especially for LEO satellites and the Chandrayaan Projects. It has undergone several improvements with each subsequent version, especially those involving thrust, efficiency as well as weight. ORBIT ïÆ'ËœAn orbit is a regular, repeating path that an object in space takes around another one. ïÆ'ËœAn object in an orbit is called a satellite. A satellite can be natural, like the moon, or human -made. ïÆ'ËœIn our solar system, the Earth orbits the Sun, as do the other eight planets. ïÆ'ËœThey all travel on or near the orbital plane, an imaginary disk-shaped surface in space. ïÆ'Ëœ All of the orbits are circular or elliptical in their shape. In addition to the planets orbits. HOW A SATELLITE STAY IN THE ORBIT ïÆ'ËœThe forward motion of the satellite is its momentum. If the gravity of the earth is not acting on the satellite, the satellite would continue in one direction. ïÆ'ËœThe swinging of the satellite gives it its forward motion. ïÆ'Ëœ When these two forces are equal, the satellite remains in orbit, without falling into or flying away from the Earth. ïÆ'Ëœ A satellites forward motion is controlled by rockets. ïÆ'ËœWhen the rockets are not fired, inertia keeps the satellite going in one direction. HOW SATELLITES WORK ïÆ'ËœReceiving uplinked radio signals from earth satellite transmission stations (antennas). ïÆ'ËœAmplifying received radio signals ïÆ'ËœSorting the input signals and directing the output signals through input/output signal multiplexers to the proper downlink antennas for retransmission to earth satellite receiving stations (antennas). MERITS ïÆ'ËœIn communication. ïÆ'ËœFor military purposes. ïÆ'ËœFor weather broadcasting. ïÆ'ËœIn terrestrial application. ïÆ'ËœSatellite Services. †¢Satellite internet access †¢Satellite phone †¢Satellite radio †¢Satellite television †¢Satellite navigation DE-MERITS ïÆ'ËœLifetime of a satellite is limited. ïÆ'ËœOnce damaged it is difficult to repair. ïÆ'ËœEconomically costly. ïÆ'ËœA small damage in any part can destroy the whole satellite. CONCLUSION ïÆ'ËœNow a day’s satellite is a basic communication media. ïÆ'ËœAny information can be transmitting from one point to another with the help of satellite. ïÆ'ËœAll people are using satellites directly or indirectly. ïÆ'ËœWithout satellites the days cannot be imagined.

Abortion: An Ethical Issue

Abortion: An Ethical Issue Abortion means terminating pregnancy. Abortion is widespread now days all over the world. Abortion is the most controversial subject when it comes to ethical issue. Ethical issues in abortion involve a constant battle between freedom and life. As per the article given in website www.bbc.co.uk/ethics/abortion, there are two groups of people: Pro-choice and Pro-life. Pro-choice people are for freedom. They consider it unethical to take away a womans right to decide over their own body. While pro-life people are for life. They consider it unethical to kill a growing life. Lets discuss in detail of both views. Prochoice people regard right to control ones own body as a key moral right. If women are not allowed to abort unwanted feotus they are deprived of this right.The foetus exists inside a womans body. A woman has the right to decide whether the foetus remains in her body, therefore a pregnant woman has the right to abort the foetus Pro-life advocates say that the right to life should always outweigh the right of an individual to equality or to control their own body. They raise arguments that abortion does not liberate women, but allows society not to cater to womens needs. They say that what women need for equality is not free access to abortion but to be given what they need to survive financially and socially as mothers. Further they hold that foetus is not a part of womans body like liver, kidney, lungs. It is a saperate Person inside the womb.Abortion means killing a human being or murder. Here they raise question that why woman or couple did not take precaution instead ? Why an innocent life is killed for someone elses mistake ? This also justifies the anti-abortion argument. Apart from Pro-life advocates there are other view against abortion like it is against feminist principle of justice, non-violence and non-discrimination. Another group objects abortion as they see it as a men plot. They argue that men see the risk of pregnancy as something that stops men having sex when they want it. If men are to achieve full sexual freedom it is essential that abortion be freely available to backup contraception. Summary: The issue of abortion is the most controversial issue. The advocates of Pro-life and Pro-choice have their own justifications. Pro-choice advocates hold that it is their right to have control over their own body. Pro-life advocates hold that from the very conception life start in the womb of a woman. It is actually a Person inside the womb. So, the question remains, Pro-life or pro-choice ? Critical analysis and evaluation of argument The fight between pro-life and pro-choice is an everlasting battle and the ethical dilemma. Lets analyze the arguments in context of two major philosophical theories: Teleological Theory and Deontological Theory, taken from the source: website: www.socyberty.com/Issues/Abortion-An-Ethical-Analyses First take a look at abortion from a Teleological point of view, it depends solely on consequences. Teleological theory is basically a Utilitarianism formulated by Jeremy and John Stuart Mill. This approach to morality and ethics hold that there is no universal basis for determining what is right. Main idea behind it is the principle of Utility. The principle focuses on the consequence of action, intentions are irrelevant, therefore breaking promise, lying, causing pain or killing someone may under certain circumstances be the right action and in other circumstances, wrong action. Applying this theory into the topic of abortion, question arises: Do I really need a child ? Am I ready for a baby ? Do I really want to give up all of my time to raise a baby ? or What if I am unhappy with a child. This theory seems to focus on a very selfish viewpoint of the situation. Utalitarian theory does not mean that a woman is selfish on her decision of abortion. Lets say a woman decides to have an abortion because she is not propared to have a child, she has no support: financial or emotional and she is still in school. The woman decides that it would be in her best interest to have abortion at this point. This woman can remain in school and not have to worry about bringing unplanned child, but just because this decision worked out well for her, was it the right decision ? Although this might seemed like a good decision, it still brings concerns and ethical dilemmas to our attention. Could she not have had child , found employment and stayed in school (as most people do)? Could she not have ultimately ended up being the happiest she has ever been because of this child coming into her life ? It might seem easy to determine ones own self interest, but do we sometimes take advantage of the choices we are given ? This question brings the case in the light of Deontological Theory. This theory is based on something other then the consequences of a persons actions. This theory has two approaches: Divine command Thoery and System of duties. Thomas Aquinas (1274-1275) was the proponent of Divine command theory. According to him the world is created by God. Whatever happens, happens with the will of God. Life is given and taken by him only. Human being doesnt have any right to take anyones life. A woman who followed the Divine Command theory might have done things differently in the same situation. She might not have based her decision on self interest, nor on consequences, but rather on something higher like God. God has given her this child to birth and care for. This also face criticism like how can we base a life altering decision on the belief that there is a higher power, God ? Immaneul Kant (1725-1805) is the leading proponent of Deontological Approach in decision making.. He formulated a System of Duties: Perfect duties and Imperfect duties. Perfect duties are to be followed in all circusmstances. In Perfect duties he mentions Not to kill an innocent person. Taking the pregnant womans case in this context, There is a Person inside her womb. From the time of conception in the womb, the child is, not just another part of the mothers tissue, but a saparate person. Abortion means killing of that Person. This faces critism that at the time of conceiving there is a just formation of cell having few tissues. Cells are created and destroyed continuously in our body. Both of these situations determine very different viewpoints, but how do we know which theory can be considered ethically moral ? There are many possible reasons a woman might choose to have an abortion, for example: to avoid interruption of life goals, the pregnancy is a result of rape, or to prevent birth of abnormal or diseased child, just to name a few. It is also obvious why some may consider abortion to be morally problematic, whether the reasons are based on religion, and the values of life. The truth is that each one of us is forced to decide how we feel about abortion, as we are with any ethical issue. So, the question remains, Pro-life or Pro-choice ? Personal Position: I personally feel that a woman should have the right to choose when it comes to abortion, but I will contradict myself under certain circumstances. In certain scenarios, the choice of abortion can be justified , but what about those who are just pure careless ? What about those who act carelessly because they know in the back of their minds that they have another alternative if something go unplanned ? For example: there are many teens that become pregnant because of carelessness in practicing safe sex. If these young girls knew that if they became pregnant, they had no option but to keep the child, would they be more careful ? Or would the number of teens who become pregnant remain the same ? I believe it would decrease.. Utilitarian approach of Teleological theory allows us to consider the Utility of child, it allows us to have second chance (abortion) should we make mistake or put health of ourselves at risk and kill unborn child. Divine Command theory does the exact opposite, it opens our eyes to new life, it leads us to believe that morality is based on God and the child was given to us by God. It also allows us to believe if our child had a deformity or disease, that it was meant to be and it is what makes our child special. It perceive us to believe that abortion would be wrong because the child was sent to us for a reason. So can abortion be ethical ? In my opinion, yes it can. It can be ethical when the choice is not being taken for granted. In conclusion, my research lead me to believe that while we have different theorys to agree or disagree with, abortion is a choice. I feel that when it comes to a decision of this kind, the ethicality of the situation is left only to that individual. As long as the women is presented with all options and alternatives, and she has the right to choose what she feels is best, regardless of our own personal feelings or religious beliefs towards abortion.

The Tailless Aircraft

The Tailless Aircraft This report on tailless aircraft presents the pros and cons of using such an aircraft design for commercial purposes. The report comprises 4 sections discussing the aerodynamics, structural innovations, engines and overall advantages and disadvantages of tailless aircraft. The aerodynamic study of a tailless aircraft highlights the importance of the wave drag and span loading distribution and different designs that can improve the aerodynamic performance effectively. In structural innovations, several existing tailless aircraft are examined to identify how the structures have been designed to create a successful aircraft. In particular, structures used in the control and stability of the aircraft are examined. As regards to engines, the positioning of the engine and the idea of using a Vertical Takeoff has been discussed. The advantages and disadvantages of a tailless aircraft have been detailed. Introduction Of the aircraft in use today, the vast majority use a tailplane to house rudder and elevators. Aircraft without such a system remain quite rare. However, the concept of tailless aircraft has long been considered by engineers and aviators as an aerodynamically ideal. In the history of the aircraft design several attempts were made to build an aircraft with reduced tail size which has sometimes resulted in smaller drag and weight but has added to controllability problems. Because of this, tailless designs have mostly been used in military applications. In this report we assess whether it is now possible to seriously use this concept in commercial aircraft. Methodology The information contained in this report was primarily gathered from textbooks and internet research. Four different aspects of the subject were identified and each aspect was researched and written up by one member of the group. Additionally, the group were able to examine a harrier jump jet which visited Perth on 7th May 2010. Results of findings The following table summarises what the research has revealed: Negative points Lower profile and interference drag Lift to drag ratio increases by 20-25% Engines can be positioned in the centre rear instead of a tail, providing the additional advantage of directional stability Roll control is more efficient due to large wingspan The tip of the wing aerofoil is not near the stall angle due to backward sweep along with twisted wing tip Vertical takeoff is not practical since a large commercial aircraft weighs too much for the thrust available from current engine technology to overcome Directional control is more difficult to achieve without adding a rudder assembly The triangular spanwise aerodynamic loading distribution does not give the best aerodynamic performance even though the wave drag is the reduced. Section 1: Aerodynamics This section of the report discusses the aerodynamics of a tailless aircraft and various factors affecting the same. A tailless a is a revolutionary conceptual change from the classical design that has been prevailing for the past 50 years i.e. a wing attached to a cylindrical fuselage with a tail to ensure the stability and manoeuvrability of the aircraft. Lower wetted area (area which is in contact with the external airflow) to volume ratio and lower interference drag is the main aerodynamic advantage of a tailless aircraft in comparison with the conventional aircraft. On the aerodynamic performance side, the maximum lift-to-drag ratio depends on the ratio of the aircraft span to the square root of the product of the induced drag factor and the zero-lift drag area, which is proportional to the wetted area of the aircraft. () max = Where Cf is the average friction co-efficient (mainly dependent on the Reynolds number) over the wetted area Swet and is the friction co-efficient. Since the tailless aircraft have a lower aspect ratio but also a lower friction co-efficient due to its larger chord, we always get smaller relative wetted area. This provides a substantial improvement in aerodynamic performance by increasing the lift-to-drag ratio of tailless aircraft in cruise to about 20-25% as compared to the conventional aircrafts. The BWB-450 and BWB-800 were designed to compare with the existing fleet of conventional aircrafts as Boeing 747 and Airbus 380. BWB-450 was presented with the span and the aspect ratio being reduced to 80 m and 7.55 respectively, thereby concluding a decrease in 30%fuel burn per seat for the BWB models as compared to other conventional aircrafts and thus requiring 3 instead of 4 engines. Moreover another such design project was successfully completed, which is based on a similar payload and performance as Airbus 380 with over 650 passengers. The configuration of the project is well suited for the application of laminar flow technology (which results in skin friction drag) to the engine Nacelle and potentially to the lifting surfaces. Also an increase in cruise Mach number increases the drag making the design of aircraft unfeasible.

GMF and Effects on Human Health Essay -- genetic engineering genetical

Effects on Human Health   Ã‚  Ã‚  Ã‚  Ã‚   With the way technology has grown, especially in the field of genetic engineering, has led scientists to figure out a way to alter how food is made. This raises concerns and lot of questions regarding the methods they are using. From what possible side effects can occur to the risks it poses to everyone and everything. Unfortunately, there has been limited research and testing done. With that in mind there is not enough information available about the hazards of genetically modified foods. But, what we do know is alarming. Most of the debate surrounding GM foods are focus on the following three issues: 1. Human and environmental safety, 2. Labeling , and 3. Consumer choice. In this section of the paper I will be discussing how genetically modified food can be dangerous on the health of humans.   Ã‚  Ã‚  Ã‚  Ã‚   First we will start with the definition of Genetically Modified (GM) is â€Å"a special set of technologies that alter the genetic makeup of such living organisms as animals, plants, or bacteria. Biotechnology, a more general term, refers to using living organisms or their components, such as enzymes, to make products that include medicines and vaccines, foods and food ingredients, feeds, and fibers†.   Ã‚  Ã‚  Ã‚  Ã‚   The unique structure of GM food creates risk to humans which can affect them in the following ways: allergic reactions, toxicity, antibiotic resistance, adverse health side effects and death. It is impossible to foresee the damage inflicted ...

Euthanasia :: Free Euthanasia Essay

Euthanasia Should we allow Euthanasia in cases where people who are terminally ill request the right to die? People should have the right to control and chose whether they die or not. However I think they should be in a mentally fit state to do so. If they only have a couple of months to live and can feel the pain if they aren’t injected day after day, then I think they should be given the chance to make decisions for themselves. It is after all their life, it belongs to them and the only judge the only decision maker should be the person themselves. I think being given the gift of life is a wonderful thing but being forced to live spoils what should be a joyful and knowledgeable experience of growing. If people are given millions of choices in life why should they be denied the choice of death? Good pain control makes euthanasia unnecessary I think pain control will only block the pain but it will leave the patient a ‘zombie’. People need to understand that although the pain can be stopped for a certain period of time it will never leave the patient. If the patient wishes to die and is in a mentally fit state to make decisions then I think they should be able to. Nevertheless I believe doctors and nurses should make sure the patient is not depressed. As people often go through stages when they feel insecure and miserable, when they feel death is their only option out. On the other hand people may disagree with me because they think if the pain is stopped then the feeling of being terminally ill is lost, it’s gone, it’s forgotten. They will argue that if the right Human beings should never be killed Human beings should never be killed. A statement that has never fit into perspective for me. Innocent Humans are killed all over the. Still governments have never stopped these immoral things. These people never wanted to die. Yet when it comes to Humans who are terminally ill and want to die, they won’t allow it. I agree that life is a gift and should be lived to the full. But people who cannot enjoy their lives should have the right to end them. Death is not always an evil to be avoided Death is not a bad thing. It can be helpful to those who need it those who are suffering each day, and waiting for death to come to them.

Arising of Magic Realism Through Allusions to the Bible and Tragedians

Gabriel Garcia Marquez’s novel, One Hundred Years of Solitude, is a novel often associated with magic realism. Throughout the novel, the idea of magic realism is promoted through intertext examples of The Bible. Magic realism is defined as an artistic style in which magical elements or irrational scenarios appear in an otherwise realistic or "normal" setting. The many intertextual examples throughout the work are alluded from outside sources such as the Bible and the tragedians of the Greeks and Romans. These allusions not only strengthen the novel, but further correlate them with the idea of magic realism. Magic realism, as defined by Wendy Faris, contains five key elements which must be present for this component to ring true in a piece of literature. The first key element is the novel contains â€Å"†¦something we cannot explain according to the laws of the universe as we know them† (Faris 167). Throughout the novel, several examples which make this constituent true are present. For example, when Jose Arcadia Buendia’s murder occurs and his blood runs through the streets to Ursula’s home, Marquez writes, â€Å"A trickle of blood came out under the door, crossed the living room, went out into the street, continued on in a straight line across the uneven terraces, went down steps and climbed up curbs†¦Ã¢â‚¬ (Marquez 144). In reality, as readers, it is known that blood cannot travel long distances or climb objects. Remedios the Beauty’s accession to Heaven is another form in which a particular scene cannot be explained by particular laws a s we know them. Marquez writes â€Å"Amaranta felt a mysterious trembling in the lace on her petticoats and she tried to grasp the sheet so that she would not fall down at the instant in which Remedi... ...n theme found throughout many fiction novels. According to Faris’ five key elements, this novel is indeed a tale of enchanting pragmatism. The novel’s intertextual examples developed by character similarities and actual events from the Bible and Greek mythology and tragedies are woven in the novel in such a way that the reader is oblivious to the fact that they truly exist. As the future scurries upon us, the theme of magic realism will continue to flourish many novels to come. Works Cited Access Bible, The. New York: Oxford University Press, 2010. Fitzgerald, Robert. Translator Homer. The Iliad. Garden City, NY: Anchor Press, 2007. Garcia Marquez, Gabriel. One Hundred Years of Solitude. New York: Harper Perennial, 1998. Zamora, Louis Parkinson and Wendy Faris. Magical Realism: Theory, History,Community. Durham: Duke University Press, 1995.

American Foreign Relations before 1913

The American Foreign Relations also referred to as the foreign policy of the United States of America is the adopted policies that the country uses in its interaction with other countries. As of now, the United States is the most influential country in the world on the basis that it is the only remaining superpower after the collapse of the Soviet Union which led to the end of the Cold War.As of now, the economy of the United States is the world largest and this helps the country in its global outreach. The country nowadays has set is foreign policies agendas and objectives as the creation of a world which is more secure, democratic and economically powerful of the benefit of the American citizens as well as the international community (Gardner, 1984).During the Bush administration, the American country has been faced by many international threats and enemies. This is because the administration is thought to have overstepped its foreign relations especially in the country's quest to bring about world peace and democracy to all nations around the world.However, it is important to relate to the historical overview of the United States of America from the time it gained independence to the beginning of the First World War (John, 1935).From 1776 to 1898The United States gained its independence from Britain in the year 1776 and this was brought about by the American Revolution. It is important to note that from that time, America began its relations with some of the superpowers of Europe at that time, key among them being France.However, from the time of American Revolution to the time of Spanish-American War, the United States foreign relations focused mainly in the regional relations rather the international relations (Engerman, 2000).During the American Revolution, the United States of America developed ties with major European powers at that time. This was necessary because it main rival and colonizer, Britain was a very powerful force at that time. The United S tates could not have defeated Britain without the help of some powerful countries.This was the reason that necessitated America to establish ties with Spain, Netherlands and France and it is important to note that the country needed the countries for their intervention in its war with Britain[1]. Britain at that time was a mutual enemy of the three European countries and the United States as well.The intervention of these three countries saw to it that America attained its independence and also assumed the status of a sovereign state (Gardner, 1984).After its war with Britain, the United States also continued to cultivate its ties with Britain and this was enhanced by the signing of the Olive Branch Policy. The United States made various efforts to restore peace and also resume its important trade with Britain. French having contributed so much in the American Revolution was also not left out of the picture.To this end, the United States continued its relations with the French Repub lic and an important evidence to this is the French presentation of the Statue of Liberty to the United States in the year 1886 (Foner, 1970).[1]  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Gilbert, Felix. To the Farewell Address: Ideas of Early American Foreign Policy. Princeton, N.J., (1961): 236 – 267

Catchment Area Analysis for 24 Hour Fitness in Cochin

CATCHMENT AREA ANALYSIS FOR 24 HOUR FITNESS IN COCHIN, KERALA SYNOPSIS OF CATCHMENT AREA STUDY SL NOTABLE OF CONTENTSPAGE NO 1Catchment area PTA, STA, TTA2 2Vytila and vicinity7 3Property demand12 4Infrastructural growth12 5Findings14 6Strategy for 24 hour fitness14 7Reference15 CATCHMENT AREA PRIMARY TRADE AREA LOCATIONDRIVING DISTANCE Elamkulam2 mins Vytilla2mins TERTIARY TRADE AREA LOCATIONDRIVING DISTANCE Gigi Nagar15 mins Panapilly Nagar16 mins SECONDARY TRADE AREA LOCATIONDRIVING DISTANCE KSRTC BUS STAND7 mins Kadavanthara8 mins 24 Hour Fitness is an international fitness brand.The trade area is divided as primary, secondary and teritiary on the basis of time taken by drive to reach the destination. 1-5 mins drive is considered for primary, 6-10 mins for secondary and 11-15 mins for teritiary trade area. This is based on the fact that, time required to reach a fitness centre is highly deterministic. TRADE AREA ANALYSIS: PTA – PRIMARY TRADE AREA STA – SECONDARY TRA DE AREA TTA – TARTIARY TRADE AREA Primary Catchment The Primary Catchment is within 0-5 minutes’ drive to 24 Hour Fitness. The areas are: †¢Vyttila †¢ElamkulamTherefore the primary catchment of 24 Hour Fitness is strategically situated amidst the densely populated Vyttila and Elamkulam areas. Secondary Catchment The Secondary Catchment is within 5-10 minutes’ drive. The areas are: †¢Kadavanthra †¢Ponnurunni Therefore the secondary catchment of 24 Hour Fitness is the densely populated Kadavanthara which is a residential area. Tertiary Catchment The Tertiary Catchment is within 10-20 minutes of drive time. The areas are: †¢Giri Nagar †¢Panampilly Nagar †¢Chalikkavattom Therefore the tertiary catchment of 24 Hour Fitness is the thickly populatedGiri Nagar, Panampilly Nagar and Chalikkavattom which is a core residential area. The primary, secondary and teritiary trade areas cover the important and potential residential areas of Coc hin. The target consumers of 24 hour fitness can easily access the brand with this location. Road Ways The Sahodaran Ayyapan road from west to Vytila is common for all the target consumers from Kadavanthara, Panampally, Kaloor. This is the primary roadway for 24 Hour fitness. This location completely restricts the flow of customers to the Gold Gym Vytila, which is a competition. The Edapally Vytila road brings in customers from north.These are the primary roadways which is sccesible for the target customers. It is giving a direct competition to Gold Gym, Vytila, which is comparatively low priced and infrastructuraly poor compared to 24 Hour Fitness. Vytila and vicinity Vyttila is an intersection as well as the name of a region in the city of Kochi, in the state of Kerala, India. It is one of the largest as well as the busiest intersections in Kerala. This node intersects the main north-south artery of the state of Kerala, namely, the National Highway 47, with three city roads of Koc hi viz, the S. A.Road (east-west), the Vyttila-Petta Road, and the Thammanam Road. Vyttila hosts the Kochi Mobility Hub, which converges different ways of surface transport (namely, local as well as long distance buses, rail, Metro Railand inland water transport) to the city onto a single node. Institutions Vyttila is home to hospitals like the Welcare Hospital and the Mother & Child Hospital. The State Bank of India, State Bank of Travancore, Punjab National Bank, Corporation Bank, Vijaya Bank,Bank of Baroda, Federal Bank, South Indian Bank all have branches in this area. Toc H Public School, St. Rita's H.S Ponnurunni, C. K. C. L. P. S are schools located in Vyttila. There are several supermarkets (prominent among them include V-Mart and the Margin Free Market chain of mini-super markets) in this area in addition to several mom & pop stores and pharmacies. Eateries like K. R Bakes, Aryaas, Best Bakers, delight Bakers and traditional ‘Thattukadas' are also decent hangouts for people across age groups in the junction. Schools Vyttila hosts the following schools ?Toc H Public School ?C. K. C Girls High School, Ponnurunni ?St. Rita's Boy's High School, Ponnurunni Hospitals ?Welcare Hospital Mother & Child Hospital ?Ranjini Eye Hospital Shopping and entertainment The Kundannoor-Edapally streatch of the National Highway 47 passing through Vyttila, is home for the largest malls in the state of Kerala. The Largest shopping mall in the state – Gold Souk is located in Vyttila on NH Bypass. The mall has 4 Screen Multiplex Cinemas, Spacious Hypermarkets, Food courts, Restaurants and branded retail outlets. There are several supermarkets (prominent among them include V-Mart and the Margin Free Market chain of mini-super markets) in this area in addition to several mom & pop stores and pharmacies.Eateries like K. R Bakes, Aryaas, Best Bakers, delight Bakers and traditional ‘Thattukadas' are also decent hangouts for people across age groups in the junctio n. The Oberon Mall, one of biggest malls in Kochi with its cinemax theatres, is also situated along the way from Vyttila to Edappally. Real Estate, Builders and Apartments: †¢Confident Group †¢Mather Group †¢Good Day properties †¢Mansions †¢Good earth †¢Aurora †¢Siddhi †¢Dubex River garden †¢Real India †¢VKL group †¢Sri Ram Krishna Builders †¢Skyline Orion Villa †¢Santhi Shreyas †¢Jewel Homes †¢Water Lilly Premium apartments Financial Institutions Axis Bank †¢Icici Bank †¢Bank of Baroda †¢South Indian Bank †¢State Bank of India †¢Thammanam Service Co-operative Bank Restaurants †¢Pizza Hut †¢Hotel Aryas †¢Smoke House †¢Muruga Hotel †¢Qualis Hotel †¢Hotel Anugraha †¢Albarad Restaurant †¢Nyle Plaza †¢Janahridayam †¢Hotel Mermaid Property Demand The proposed site is between the Vytila Junction and Elamkulam Bridge. The property cost at thi s site averages to 10-12 lakhs per cent. This is one of the most demanded properties in Cochin. This is because of the high residential potential and the emergence of Vytila as the second business centre of Cochin.There has been a drastic increase in the land prices at Vytila over years due to this factor. Infrastructural Growth With the advent of the Vytila mobility hub Vytila is also expecting a major infrastructural change. The Cochin metro is proposed to be passing through Vytila. Recent talks between policy makers indicate that the metro may have a metro stop at Vytila. With operations of Cochin Metro service more people will have direct access to the GYM, within minutes, thus increasing the trade area of the fitness centre. This aspect is also considered while selecting the current location. FINDINGSThe proposed site for 24 Hour Fitness in Cochin has advantages as well as disadvantages. Though the property costs are high, the site attracts the major target customers if located at the proposed site. The site between Elamkulam Bridge and Vytila Junction covers major residential areas covering middle and high class men and women at Vytila, Kaloor, Panampally Nagar, Kadavanthara etc. The site is centre to many apartments where target customers live in. The site directly gives competition to Gold Gym blocking their accessibility through the west road entering Vytila. There have been huge developments in infrastructure.The Cochin metro can bring in customers from far city within minutes to the site as the metro passes directly over the place. Strategy for 24 Hour Fitness The International Fitness brand can definitely enter the Cochin market with their fitness message. There has been an increase in the fitness concerns with the people in Cochin. The proximity to the fitness centre is a major concern for all the members of the brand. Taking this factor into account and to attract maximum number of target customers, 24 Hour Fitness can adopt following strategies. †¢High accessibility †¢Good parking facilities †¢Loyalty schemes Separate training hours for non-working women †¢Separate Training hours for working men and women There cannot be any spill over effect for 24 hour fitness with this site. This is because the place is void of any corporate offices from where employees may prefer to go to the fitness centre prior work. This move is based on the fact that this spill over will not account for a high attraction of customers. 24 Hour Fitness can even facilitate transport facilities to achieve high attraction. Sources and Reference †¢Goole Maps †¢ICICI PROPERTY REPORT †¢NEWSPAPER ARTICLE – TIMES PROPERTY †¢24 HOUR FITNESS OFFICIAL WEBSITE

Mattel and Toy Safty Essay

In 2007, the Mattel toy company recalled around 20 million of its toy products do to contamination of lead in the paint and safety issues dealing with parts of its products (magnets) that was manufactured in China. The Mattel Company is considered the â€Å"global leader’ in toy manufacturing with over 30,000 people employed in over 40 countries and operates in more than 150 countries. The Mattel Company faces the dilemma a lot of companies face when using overseas manufacturing. If not closely monitored, they can and will cut corners which could put the company at risk. Who is responsible for the safety of children’s toy and who should be held accountable? An Analysis of the Mattel case study should reveal who is and who isn’t. 1. Do you believe that Mattel acted in a socially responsible and ethical manner with regards to the safety of its toys? Why or why not? What should or could Mattel have done differently? The study case of the Mattel Toy Company’s toy recall is a difficult one to call. The company went over and beyond to make sure that its products where safe for the public. The case study states that in 1997, the Mattel Company developed a â€Å"code of conduct† which included a wide range of ethical issue such as child safety laws, safety and health regulations. Mattel went as for to hire Professor S. Prakash Sethi, who is the head of a non-profit organization by the name of the International Center for Corporate Accountability which conducted audits on Mattel facilities. Mattel was also recognized by Forbes Magazine as one of the most trustworthy U.S. companies and was also recognized by CRO Magazine as one of the best corporate citizens out of 100, so they had built a reputation for being a solid socially responsible and ethical company. Ethics can be defined as moral principles that guides the way a person or a business behaves. Social responsibility is an ethical theory, that a person  or a business has an obligation to benefit society as a whole. Basically the products or actions of a person or a business should be a benefit to society and The Mattel Company took pride in being just that. Even though Mattel had to recall a lot of its products, I do believe they acted socially responsible and ethically. Mattel tested its products in their own testing facilities and in other special test labs to ensure the safety and quality of its products, and had specifically targeted lead based paint. Once Mattel found out that some of its products contained harmful lead based paint and the magnets in some of its products could be a safety concern, the company had an immediate recall of the products contaminated. Mattel used several outlets such as the Consumer Product Safety Commission, regulating agencies from all over the world and newspapers to address the issue of the lead based paint in its products and the magnet problem. Mattel also made it possible for consumers of their products to have access to outlets in which they can return the contaminated products for a refund or a safer replacement product. Mattel did do a lot to ensure the safety and quality of their products, but, they could have taken even further steps to avoid this situation. For one, Mattel should has done research on the on the Chinese firms outside contractors. Even though some of these contractors had been audited, they replaced the approved paint for the lead based paint. So Mattel should have kept a closer eye on these subcontractors in order to maintain their good image with society. Mattel cannot be solely at fought for this recall; the Mattel Company was also a victim in this situation. 2. Who or what do you believe was responsible for the fact that children where exposed to potentially dangerous toys? Why do you think so? This is a hard question because there are several entities that can be blamed for this recall. Number one is those that are responsible for consumer product safety. The Consumer Product Safety Commission (CPSC) is an independent federal regulating agency who assumes the responsibility of protecting the public from dangerous products. This agency was created in 1972 with the Consumer Product Safety Act. This Act gives the CPSC the authority to develop standards and bans on products. It is the job of this regulating agency to make sure that products are safe for public use, but it seems the dropped the ball on the Mattel toy recall. The case study states that the CPSC was severely underfunded and understaffed. The case study also states  that in 2007 the CPSC only had about 400 employees in which only 15 of them were investigators with the job of investigating products that come through the ports. Needless to say with the amount of product that come through the ports and the number of ports used in the U.S. to import and export product is too much for only 15 people to handle, also the CPSC only had 100 employees monitoring products on store shelves and only had a budget of 62 million. Another player that has responsibility in exposing children to potentially harmful products (toys) is the Chinese government. The enforcement of lead standards in China was not enforced, so the companies did as they wanted when it came to lead based paint. The magnet situation of more of a product design malfunction, according to the case study, so that can be easily taken care of, however, the lead base paint issue is one of enforcement. If the Chinese government had adequate enforcement of lead paint regulations, which is better than that of the U.S. at one point, this would have never been a problem for the Mattel toy company. The most responsible for this recall is the Mattel Company. Regardless of regulation inspectors and audits, they owe it to the stakeholders of the company to ensure that the products that they are manufacturing are safe. That is what social responsibility and ethics are based upon. 3. What is the best way to ensure the safety of children’s toys? There is no way to fully ensure the safety of children’s toys, but the best way is to enforce federal legislation on toy manufactures. This is a challenge because the majority toys in this country are manufactured in other countries such as China and Asia . Federal regulation can ensure that there are uniform standards for toy manufacturing. As of June 12, 2012, all manufactures and importers of children’s toy must comply with federal regulation. These toys must be tested for compliance of regulation and the testing must be done by the CPSC. It is also in the best interest of other countries to enforce regulation on toy manufactures. Since toys are a big export for other countries such as China and Asia, they would want to be in good standing with the U.S. by setting some standards on toy manufacturing. Consumer’s advocates groups need to stay involved in toy safety issues and provide input that can help set guidelines for federal legislation. The consumer advocates can influence regulation and keep the public informed on issues of child toy safety. In 2008, consumer groups such as the Consumers  Union, Consumer Federation of America, and Kids in Danger attended House and Senate conferences to push for a well-funded Consumer Product Safety Commission (CPSC). As a response to the demand of the consumer advocate groups, Congress acted by banning lead based products in children’s toys. This act of the consumer advocate groups is a perfect example of the interactive social system between corporations and society, the fact that they are so interdependent on one another that if action is taken by one it will affect the other (Lawrence & Webber, 2011, p.21). These stakeholders can have a profound effect on regulation of a company. The toy industry can also play a large role to ensure the safety of children’s toys. They can listen to input form stakeholders on issues that could make their products safer. They also can follow the requirements of the Consumer Product Safety Commission closely or even go a step beyond the CPSC regulations to ensure that their toys are safe for kids. The toy industry could also be shown as a leader in toy safety by collaborating with foreign manufactures to push their toy safety regulation to coincide with that of the U.S. standard. They could hold international regulation meetings and have input on the regulation of toy safety that can have influence on policy. These kinds of actions from the toy industry could give them a good standing with stakeholders and regulators both if they are viewed as being actively involved in the safety of the children’s toys that they are making. After all these are their customers and in business you are trying to acquire more customers not lose them, so these type of actions by the toy industry would only benefit them and the customers that helps make them the business’s that they are today. Since the increase of imported toys, the rate of injury to kids playing with toys has increased. Accountability of the toy industry is a must to bring toy safety to a minimum. Corporate negligence of the sub-contractors of toy manufactures need to be recognized and investigated thoroughly to insure toy safety. An article be the American Association for Justice (Playing with Safety: Dangerous toys and the Role of Americas Civil Justice System) states that â€Å"A Public Citizens analysis of consumer recalls found that companies waited an average of 993 days to inform the CPSC of defects, and the agency (CPSC) waited another 209 days before informing the public (American Association for Justice) of the dangerous toys. This is a little more than 3 years before the public is  informed of a toy health hazard by the toy industry and CPSC. The CPSC and the toy industry should be held responsible and held accountable for those that are put in danger by these toys. If both the CPSC and the toy industry are held accountable for the time laps of getting the information to the public it would improve toy safety. 4. What do you think is to best way for society to pr otect children from harmful toys? Specifically, what are the appropriate roles various stakeholders in this process? The best way to protect children from harmful toys has to be a collective effort between stakeholders, the toy industry, and government regulators. This collective effort can be beneficial to all. First, the federal government must fund the CPSC properly in order for it to function at a level in which it can handle the bulk of toys coming through our ports. I can see how the CPSC was overwhelmed with the task of making sure all toy products are safe before and after they hit the shelves. The CPSC was too understaffed and underfunded to be affective. At the time of the recalls, the CPSC’s power was limited to ensure the safety of children’s toys. According to an article written by Jo Hartely of the National News (Protecting Our Children from Toxic Toys), â€Å"The CPSC cannot legally test children’s products before sale and do not have the funds or capacity to do so if desired† (Hartley, 2008). This at the time really made it hard to ensure toy safety. Also, according to the article, another way to ensure toy safety is to revise the U.S chemical regulatory system. The article states that around 80,000 chemicals are cleared for use in everyday products and 2,500 are introduced every year. Most of these chemical have not been tested for potential health impacts on children or fetuses (Hartley, 2008). This is another flaw in the regulatory system that needs to be addressed to ensure toy safety and it will take a collaborative effort to make this happen. The appropriate role for the non-market stakeholder in this toy safety issue is to use the non-market stakeholder’s power to use resources to influence regulatory policy on toy safety. Stakeholder power is founded in the power that they have to vote for those that support regulations that they want to see enacted on toy safety. The can also utilize economic power in order to get there point across to the toy industry on toy safety. They also have the power to use civil suits against negligent toy manufactures that are selling harmful toys. Consumer advocate groups are also categorized as  non-market stakeholders. These groups can pull resources and get the word out about the negligence of a toy manufacture which could also persuade government entities to act. Groups such as the Consumer Federation of America, kids in danger and the Consumer Union have already influenced stricter regulation of the toy industry with success. The categorization of the federal government as a non-market stakeholder is still up in the air for most, but, the impact and role that the government has in the issue of toy safety is huge. The government can and has the power to regulate the toy industry to ensure toy safety. Regulating toy safety is not an easy task for the government and will not ensure that all toys will be safe, but, they can minimize the problem. One way they government can minimize harmful toys that may get in the possession of children is by funding the CPSC properly so that they can enforce the regulatory laws on toys safety. Between 2008 and 2011 the federal government passed regulations that give the CPSC more power to hold the toy industry accountable for toy safety. In 2008, the Consumer product Safety Act was amended in 2011 which gave the CPSC new found power to enforce regulation laws on the toy industry which included civil and criminal penalties for those that broke the laws of toy safety. It also included third party testing of toy products so that testing of the products was not left solely to the toy industry which could be manipulated as so the case of Mattel toys. The federal government also passed the Child Protection Safety Act, which protects children from choking hazards. This legislation requires warning labels on products that may present a choking hazard for kids and also mandates that manufactures, importers, distributors, and retailers to report certain choking incidents. Even though the Mattel toy company and CPSC regulatory agency made adjustments necessary to minimize children’s toy hazards. It was their duty and obligation toy insure that the products that they sold were safe for children to play with in the beginning. All though Mattel had an outstanding ethical and social responsible reputation, the ball was dropped on this issue in 2007. One reason was the expansion of manufacturing and production of their products to foreign countries that they could no keep a close eye on. All in all it is up to us all to ensure the safety of our children when purchasing toys for our kids to play with. We cannot solely leave it up to r egulatory  systems and toy manufacture; we also have to play our role in this issue. Reference American Association for Justice (2010). Playing with Safety: Dangerous Toys and the Role of America’s Civil System. http://www.justice.org/cps/rde/xbcr/justice/PlayingWithSafety.pdf Lawrence, A. T., & Weber, J. (2011). Business and Society: Stakeholder, ethics, public policy (13 Ed). New York. McGraw-Hill Companies Inc. Hartley, J. (2008). Natural News, Protecting Our Children from Toxic Toys. http://www.naturalnews.com/022991_toys_children_chemicals.html# U.S. Consumer Product Safety Commission. https://www.cpsc.gov/en/Regulations-Laws–Standards/Statutes/

Legal Aspects of Criminal Justice System

Jury nullification is basically the situation wherein a certain guilty person was given the judgment â€Å"not guilty† by the set of jurors or the jury itself when that person is believed to be guilty of the crime he or she is accused of. The Jury tends to play an immoral role against his or her job which is to give justified verdict to a certain crime and thus apply an altered decision into the accused. An example of a jury nullified case is the famous case during the year 1735. This case is the trial case of John Peter Zenger charged by the former Governor of the New York Colony, William Cosby. In this case, the verdict given by the Jury to Zenger is a â€Å"not guilty verdict† wherein all the facts where given that Zenger did all the crime which he is accused of (Institute, 1992). Another case is the case of William Pen wherein he as the accused was acquitted by the set of juries. This happened in the year 1670 in London; his case was Preaching Quakerism. During this period four from the twelve chosen jurors made a non-guilty verdict which led them to spend time in prison and pay the damages they created but before they get into imprisonment, one of the judges made his plea and was able to nullify the unjust law (Institute, 1992). In the negative side of the defendant, his rights were violated because the sixth amendment says that â€Å"a defendant should not be deprived and even oppressed from his legal concerns† (FindLaw, 2008). When jury nullification occurs the defendant will be deprived from knowing what’s really happening in the court wherein the case holds his/her right to freedom. The nullification of the Jury to the case could also affect the Judge final decision about the defendant if he or she will be acquitted. Thus, the judge final judgment could henceforth be negative for the accused or the defendant because the judge may think that the defendant just influenced the Juries who voted for the accused person’s acquaintance. References FindLaw. (2008). Right to a Speedy and Public Trial [Electronic Version]. Retrieved January 16 from http://caselaw.lp.findlaw.com/data/constitution/amendment06/02.html.             Legal Aspects of Criminal Justice System Felony Disfranchisement is a process in which a convicted criminal lose his or her rights and property. It is also considered as â€Å"civil death†, whereby these persons would lose all rights and claim to property, including the right to vote. The felony disenfranchisement law was first implemented way back in ancient Romans and Greeks. Deprivation the convict’s right, confiscation of private properties and exposure to death are consequence of having a felony record during the earlier times. The Englishman gave birth to the disfranchisement of offenders in America. Nowadays, only three states in America continue to impose felony disfranchisement and the illegibility to vote to all citizens with a felony record which are states of Iowa, Kentucky, and Virginia. Conviction with felony record has its own consequence merely different from the felony disfranchisement implementation in earlier times. Today, felonies don’t have the right to vote, serve on a jury or even hold a position in the government which makes them different from an ordinary people, the lowest of the citizens. The implantation of felony disfranchisement is one of the political anomalies in America or even in other countries. As we all know, voting is a not only a privilege but a right that any man wants to exercise.  The United States Government eliminates constraints on voting whether by court or legislative action. The citizens convicted by felony are the only few who can not exercise their voting rights during elections (Rockville, 1986). Most of the pro – disfranchisement are arguing that giving the ex-felons a right to vote may serve as a risk in the society since an election process is a essential activity for the development of a state.  Pro – disfranchisement cited some problems that may occur when a offender is given a right to cast a vote. They say that it may harm the law if changed, voter fraud may occur or the â€Å"purity† of ballots may be affected (cited in Human rights Watch). These reasons are some of those who make the ex-felons unrightfully voters. A good example of a convicted felon was Richardson v. Ramirez who was barred from voting without violating the Fourteenth Amendment. Richardson v. Ramirez leaves open a valid claim that the unequal enforcement of disfranchisement laws is unconstitutional. Plaintiffs argued that California counties’ different interpretations of â€Å"infamous crime† meant that the law was unequally applied. The U.S. Supreme Court sent the case back to the California Supreme Court to decide this issue, but before it could rule, California changed its law (Brennan 2007). A guy named Baker v. Pataki from New York City was a very good example of â€Å"purposeful racial discrimination† having him convicted by felony. A mixed Afro-American Latino challenged New York’s federal court who denied the votes of several felony offenders, in prison or on parole. He said that these act is merely against the Voting Rights Act 1968 since it has a disproportionate racial impact. The lower court however dismissed the case reasoning that the U.S Supreme court in Richardson v. Ramirez upheld the disfranchisement law. They also found that Voting Rights Act did not apply to such laws. The effect of felony disfranchisement law has been drastically implemented in the past century since there are increasing numbers of criminals that are sentenced by felony; they are sent to prison and stay there for a long time. Voting is a right, and equal right must be given to a citizen even if he or she was an offender of the law. Issues in racial discrimination and human rights must take into consideration. References Human Rights Watch and the Sentencing Project (October 1998). Losing the vote: the impact of   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   felony disenfranchisement laws in the united states. Retrieved January 17, 2008, from   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   http://www.hrw.org/reports98/vote/ Westat, Inc. (December 1986). Historical corrections statistics in the united states.